Door Check V 1600 for Sliding Doors
With a special mounting bracket for sliding doors
Characteristics
- Detailed information on the door damper V 1600 can be found here
- The mounting bracket made of stainless steel allows its use on sliding doors
- The recommended closing force in normal-case scenario is 20 N, as otherwise the force required to open the sliding door would be too high
Dimensions of mounting bracket for sliding doors
Part no. 203037
Dimensions of door damper V 1600
Dimension of X with
- 1009 hook for flush doors: X = 59
- 1013 hook for overlapping doors: X = 78
- 1011 hook for recessed doors: X = 39
All dimensions in mm
The mounting bracket for the V 1600 is screwed approx. 85 mm below the door frame on the door near its closing edge. The distance to the closing edge depends on whether the closed door just rests against the frame or enters in a recess.
Fold out the base plate of the door damper and fix it to the bracket. Then hinge down the body of the door damper until it clips to its base plate.
To mount the hook, bend the roller lever of the door damper. Firstly, fix the hook to the frame only by using the two oblong holes so that it’s in line with the door damper and the rubber roller just touches its front edge when closing. After having adjusted the hook on the correct position, you can also fix it through the two normal holes.
Find detailed product description downloads and order information on our international site. We'd love to assist you with finding the right solution for your application.
To see our Door Checks in their variety of installations see our application page